Incendia signs Singapore infrastructure protection agreements

Incendia signs Singapore infrastructure protection agreements

Incendia has signed two Singapore partnerships for infrastructure protection technologies. The agreements cover distribution across seven Southeast Asian markets and joint research into threat detection systems for aviation, industrial and critical infrastructure applications.


Canadian–British technology company Incendia has signed two agreements with Singapore-based businesses to expand the regional distribution and development of autonomous detection technologies used for infrastructure protection.

The agreements, marked at a ceremony at the High Commission of Canada in Singapore on 18 November, involve Singapore Aerospace & Aviation Services Pte Ltd (SAAS) and Miltrade Technologies Pte Ltd. They establish separate arrangements for commercial distribution and research into threat detection systems.

Incendia intends to use Singapore as a base for further expansion across Southeast Asia, with potential applications in aviation, industrial facilities, defence and other critical infrastructure environments.

The distribution agreement with SAAS covers Singapore, Malaysia, Thailand, Indonesia, Brunei, Vietnam and the Philippines. The company will support the introduction and commercialisation of Incendia’s technologies across those seven markets.

SAAS supplies aviation ground support equipment and security systems, working with airports, airlines, maintenance providers, government agencies and other organisations requiring specialist equipment. Its existing customer relationships and technical support activities provide a route for evaluating Incendia’s technology in different operating environments.

Incendia develops autonomous environmental detection and wireless communication systems. Its equipment is intended for installations where conventional monitoring infrastructure may be difficult to deploy or where a disruption could affect the availability of central communications systems.

Such conditions can occur at remote industrial facilities, temporary installations and infrastructure sites spread across large areas. The requirements may differ from those of a conventional commercial building with established electrical distribution, fixed detection circuits and permanent communications connections.

Incendia’s approach combines sensing equipment with a wireless communications architecture that can exchange information between connected devices. Depending on the configuration, detected conditions can be communicated to other equipment or personnel responsible for monitoring and responding to an incident.

SAAS already lists Incendia’s Asgard detection platform within its security equipment portfolio. The offering includes multi-sensor detection devices, wireless manual alarm points and optional communication equipment for suitable installations.

The Heimdall device combines 12 sensing functions, including measurements associated with smoke particles, temperature and carbon monoxide. On-device analysis is intended to assess several environmental signals together when identifying developing hazards.

Using multiple measurements can provide additional information about the conditions surrounding a potential incident. The practical effectiveness of the approach depends on how the sensors respond to their environment and how the processing system distinguishes relevant changes from routine background conditions.

Industrial environments can generate dust, heat, vapour and other conditions that influence detection systems. The appropriate configuration therefore depends on the hazards being monitored, the surrounding process and the location of the equipment.

The product range described by SAAS also includes Gjallar wireless manual alarm activation points and the optional Bifrost communications gateway. These components provide different functions within a wider monitoring arrangement rather than representing interchangeable detection devices.

A further device, Aegir, is being developed for water and flood monitoring. SAAS describes its availability and specifications as subject to confirmation, so it should not be treated as an already established commercial product within every proposed installation.

Wireless communications can reduce the amount of fixed detector cabling required in suitable environments. However, radio coverage, equipment placement, interference and building characteristics must be assessed before a system can be expected to operate reliably at a particular site.

Remote industrial premises may also require monitoring equipment to remain useful when external connectivity is interrupted. A local network arrangement can support communication between installed devices without depending on every message passing through an external service.

The resulting system still requires an appropriate means of alerting personnel and coordinating a response. Detecting a hazard is one part of the protection process; the information must reach the people or systems responsible for taking action.

SAAS identifies Incendia’s offering as supplementary monitoring for applications including airports, data centres, warehouses, commercial buildings and critical industrial infrastructure. It does not describe the equipment as a replacement for legally required or certified fire detection and alarm systems.

Individual installations will remain subject to site assessment, relevant local regulations and confirmation that the selected products are suitable for the intended purpose. Wireless approvals, environmental requirements and integration with existing safety arrangements may differ between the seven markets covered by the distribution agreement.

The second agreement, with Miltrade Technologies, concerns research and development rather than regional distribution. Working within the SIGNIA consortium, the partners intend to advance Incendia’s threat detection capabilities for critical infrastructure protection.

Miltrade brings experience in the integration and support of defence and security systems. The collaboration is intended to combine that expertise with Incendia’s autonomous detection and wireless communications technologies.

Systems integration can influence whether a detection technology is useful within an operating infrastructure installation. Information from new monitoring equipment may need to be presented through existing security systems, communications networks or site management procedures.

Developing these connections requires agreement on equipment interfaces, information formats and the behaviour expected when an alarm or other monitored condition occurs. The design must also account for operational requirements such as equipment availability and the responsibilities of personnel responding to the information.

Research may also be needed when applying equipment developed for one environment to another. Environmental conditions, the types of hazards being monitored and the existing communications infrastructure can affect the suitability of sensors and the configuration of the wider system.

Incendia has not disclosed a research budget, a completed prototype arising from the Miltrade agreement or a timetable for commercial release of any jointly developed technology. The arrangement establishes a collaborative development programme whose results remain to be determined.

Dodji Koffi, chief operating and strategy officer at Incendia, said the partnerships combined the technology company’s capabilities with the regional and integration experience of its Singapore partners.

“Effective infrastructure protection requires both reliable technology and a clear understanding of operational needs. SAAS and Miltrade bring complementary expertise that will help us strengthen our regional presence and advance our detection capabilities,” he said.

Incendia is extending its attention towards civilian applications alongside work involving defence and public safety. The underlying requirements overlap in areas such as environmental monitoring, the protection of remote assets and the communication of warning information during abnormal operating conditions.

The Canadian Trade Commissioner Service and the High Commission of Canada in Singapore supported the development of the relationships, including through the Canadian Technology Accelerator programme. Their involvement facilitated commercial activity rather than constituting approval or certification of the technologies.

The agreements do not identify a completed installation at an airport or industrial facility, nor do they disclose confirmed sales values or procurement commitments from individual operators.

Incendia’s immediate commercial development will involve working through SAAS to assess suitable applications across the seven covered countries, while the Miltrade collaboration focuses on further technology development. Subsequent customer projects and research results will establish the operational outcomes of the two agreements.


Stories for you


  • Kistler introduces compact monitored joining systems

    Kistler introduces compact monitored joining systems

    Kistler has introduced compact servo presses for monitored assembly operations. The NCFx range provides six force ratings from 2 to 80 kN, with integrated strain gauge sensing, digital control and process documentation.


  • ABB Bilbao factory achieves 98% landfill diversion

    ABB Bilbao factory achieves 98% landfill diversion

    ABB has secured independent recognition for waste diversion in Bilbao. Its ring motor factory achieved UL 2799 Gold validation with a 98% landfill diversion rate, equivalent to approximately 221 tonnes of waste annually.