DuPont OxyMem selected for California wastewater upgrade

DuPont OxyMem selected for California wastewater upgrade

DuPont’s OxyMem modules were selected for California wastewater plant upgrades. The Windsor project is the technology’s first US municipal selection and is intended to add biological treatment capacity within existing infrastructure.


DuPont says its OxyMem membrane aerated biofilm reactor modules have been selected for an upgrade at the Windsor Water Reclamation Facility in California, its first US municipal project using the technology. The modules are intended to increase biological treatment capacity within existing infrastructure, with the company identifying more efficient oxygen delivery and enhanced nutrient removal as potential benefits. Selection for the project is confirmed; completed installation and verified operating performance have not yet been established.

The Windsor plant treats municipal wastewater to meet applicable discharge and reuse standards, with biological processing forming one stage of the overall operation. The proposed upgrade will introduce OxyMem technology into the biological treatment stage, rather than replace all the mechanical, clarification or sludge handling systems at the site. The number of modules, detailed construction timetable and treatment performance targets were not stated in the announcement, so the scale of the project should not be inferred from installations elsewhere.

A membrane aerated biofilm reactor, commonly abbreviated MABR, supplies oxygen to microorganisms through a gas-permeable membrane. Instead of relying exclusively on conventional aeration that disperses air bubbles through a tank, the membrane presents a surface on which microorganisms can grow while oxygen moves across the membrane. Pollutants in the wastewater reach the biofilm from the liquid side, enabling biological treatment at the interface between oxygen supply and the water being processed.

Aeration consumes substantial electricity in conventional activated sludge treatment; the membrane changes how oxygen reaches the organisms performing the biological treatment. In a conventional activated sludge system, blowers introduce air and oxygen has to dissolve in the bulk liquid before organisms can use it. The energy consumed depends on airflow, pressure losses, tank geometry, equipment condition and process controls. A membrane system can deliver oxygen directly through its surfaces, potentially avoiding part of the transfer loss associated with bubbles, although the actual energy benefit depends on the influent, loading, control settings and the surrounding plant configuration.

Biofilm growth also changes the distribution of organisms responsible for treatment. Oxygen concentration can vary across the thickness of the biological layer, while wastewater constituents approach from the outside. This can support complementary microbial processes under suitable conditions and may help an existing plant handle higher nutrient loads. It does not guarantee removal of a specified quantity of ammonia or nitrogen without appropriate design, residence time, process monitoring and verified performance under the plant’s operating conditions.

OxyMem modules are designed for process intensification, including retrofits intended to increase biological treatment capacity within existing tanks. Expanding a conventional plant can demand additional civil works, new aeration equipment or larger biological treatment volume. A membrane installation may reduce some of those requirements, but the existing hydraulic capacity, solids management systems and condition of equipment still determine what is feasible.

The company lists a biofilm establishment period of roughly three to six weeks for its plug-in modules in general product guidance. That is an indicative maturation period rather than a Windsor commissioning date. During start-up, operators would need to establish the expected microbial population, adjust oxygen delivery and monitor water quality to confirm stable behaviour. Changes in wastewater temperature and loading can affect how quickly a biological reactor reaches its intended operating range.

DuPont has prior European experience with large OxyMem installations. At Monkmoor wastewater treatment works in England, 48 modules were installed in 2024 as part of an integrated fixed-film activated sludge project designed to intensify an existing treatment process. The company’s published case study describes that installation as a retrofit that increased capability within the established works. Such experience provides an operational reference, but the Windsor process requirements and actual results will have to be demonstrated separately.

Municipal operators are increasingly required to balance treatment performance with energy demand, capital expenditure and plant resilience. Aeration is a significant operational consideration because it requires mechanical equipment, control systems and electrical power over extended periods. A retrofit that transfers more useful oxygen to the biological process could alter energy consumption and treatment capacity, but only measured comparisons against the site’s baseline will establish the scale of any improvement.

The Windsor project extends OxyMem into the US municipal market, subject to installation and commissioning. Its module configuration, commissioning timetable, effluent performance and electricity consumption have not been published. These measurements will be needed to establish whether the technology delivers additional treatment capacity and lower aeration demand under Windsor’s actual wastewater conditions.


Stories for you


  • Flexxbotics adds prescriptive AI to manufacturing platform

    Flexxbotics adds prescriptive AI to manufacturing platform

    Flexxbotics has introduced prescriptive AI options across manufacturing software solutions. The application uses contextual production data and process baselines to recommend adjustments, while keeping operational changes subject to authorisation and control.


  • Mitsubishi Electric urges factories to cut energy waste

    Mitsubishi Electric urges factories to cut energy waste

    Mitsubishi Electric urges manufacturers to tackle energy waste inside factories. The company recommends measuring production equipment consumption and addressing inefficient operating conditions as UK industrial electricity support approaches its April 2027 start.