ZF Foxconn begins Bentley axle plant construction

ZF Foxconn begins Bentley axle plant construction

ZF Foxconn has started constructing Bentley’s dedicated Stoke-on-Trent axle factory. The site will supply complete suspension modules to Crewe from 2027, using a just-in-sequence manufacturing and delivery model.


ZF Foxconn Chassis Modules has begun constructing a dedicated axle assembly plant at Chatterley Park in Stoke-on-Trent for Bentley Motors. The facility, approximately 17 miles from Bentley’s Crewe headquarters, will assemble complete front and rear axle systems for delivery to the carmaker’s production lines. Construction is under way, with production scheduled to begin in 2027; no current manufacturing output has been claimed for the site.

The plant is being developed exclusively for Bentley and will combine axle module assembly with the logistics required to deliver finished systems in vehicle build order. Its remit covers future Bentley programmes using combustion engines, hybrid drivetrains and battery electric propulsion. Although the modules will differ between vehicle specifications, the supplier intends to manage their production and delivery through one dedicated operation serving Crewe.

Production will follow a just-in-sequence model in which assemblies are supplied to match the particular vehicles moving through the customer’s production schedule. That differs from a conventional arrangement in which identical components arrive in larger batches and are stored until required. At an automotive assembly line carrying several specifications, the right module must be delivered in the correct order and at the correct stage of production. A vehicle variant change or revised build schedule can alter the required sequence even if the overall production volume remains the same.

Such an operating model depends on close coordination between the supplier’s production control and the carmaker’s assembly requirements. Component identification, schedule changes, manufacturing records and transport dispatch all have to be consistent if finished modules are to reach their point of installation at the intended time. A short geographic distance can reduce the amount of transport time between the two operations, although it does not remove the need for reliable scheduling, traceability or contingency arrangements.

ZF Foxconn Chassis Modules already specialises in the assembly and logistics of vehicle chassis systems, drawing on the automotive engineering activities of ZF and the manufacturing capabilities of Foxconn. At Chatterley Park, that business model will be applied to a single customer’s production programme. The plant will need to accommodate model changes, variant-specific components and the production schedules issued by Bentley while preserving identification of each completed module through assembly and dispatch.

Complete axle and suspension modules incorporate multiple components whose interfaces must remain consistent with the vehicle’s design and final assembly process. Their configuration, fastening and inspection have to match the intended vehicle variant, particularly when different powertrains alter packaging or vehicle mass distribution. Bentley and ZF Foxconn have not disclosed the assembly equipment, testing stations or quality acceptance criteria planned for the new plant, so its precise production process cannot yet be described.

Bentley’s changing powertrain portfolio adds a further planning dimension. Vehicles using combustion engines, hybrid propulsion and battery electric systems can impose different packaging, mass distribution and component requirements on their suspension architecture. The company has not said that a single identical axle will be fitted across those platforms. Instead, the new factory is intended to provide manufacturing and logistics capacity flexible enough to assemble the specified modules for different programmes as Bentley develops its vehicle range.

Bentley has been modernising its Crewe operations as it prepares for a changing mix of powertrains. A nearby module supplier can support that transition by handling a defined part of the build process outside the final vehicle plant, with the finished modules arriving in the sequence required for installation. The arrangement will still depend on dependable information exchange between the two operations, as well as the availability of incoming components and reliable road transport.

The Chatterley Park development is also part of Bentley’s longer-term ambition to locate more suppliers close to Crewe. Andreas Lehe, the manufacturer’s board member for manufacturing, has described the axle plant as a first step towards a future supplier park. The wider park remains an ambition, rather than an additional construction programme confirmed under the present investment; only the dedicated axle facility has been described as under construction.

Bentley will continue assembling finished vehicles at Crewe, while ZF Foxconn Chassis Modules will be responsible for the dedicated axle assembly and sequencing operation in Staffordshire. The exclusive supply arrangement ties the plant’s production requirements to Bentley’s model plans and order mix. The partners have not announced the new factory’s annual capacity, total capital expenditure or expected employment numbers, leaving the scale of future output unquantified.

Building work at Chatterley Park will be followed by installation and commissioning before deliveries begin in 2027. Once operating, the plant will have to maintain the correct assembly configuration, traceability and delivery sequence for Bentley’s changing vehicle requirements. The confirmed milestone is the start of construction; neither production volumes nor operating performance at the new facility has yet been reported.


Stories for you


  • Siemens Energy tests hydrogen-fired industrial CHP

    Siemens Energy tests hydrogen-fired industrial CHP

    Siemens Energy demonstrates cogeneration using hydrogen at a French mill. The HyCoFlex trial combined full-load electricity and process steam production with start-up and shutdown on pure hydrogen, while commercial deployment remains unconfirmed.


  • Tesla plans €3bn German Cybercab manufacturing expansion

    Tesla plans €3bn German Cybercab manufacturing expansion

    Tesla proposes major investment in its German vehicle manufacturing complex. Its planned Grünheide building targets eventual annual capacity of one million Cybercabs, with construction envisaged in 2027 and production from 2029, subject to approval.