H-Power deploys 100kW generator at construction site

H-Power deploys 100kW generator at construction site

H-Power has placed a new 100kW generator into commercial service. The UK construction deployment uses an expanded fuel cell platform, with projected hydrogen consumption and diesel displacement savings yet to be measured.


H-Power has put its new 100kW DC hydrogen fuel cell generator into service under a paid contract at a major UK construction project, extending the power range of its existing mobile generator platform. The LC100dc is operating at the site rather than remaining in a prototype demonstration, although the customer and location have not been identified. The deployment is intended to address higher power requirements such as construction plant charging and substantial welfare facilities where a permanent electricity connection may be constrained or unavailable.

The company expects the initial phase to consume up to 10,000kg of green hydrogen and estimates that using the generator could avoid more than 350 tonnes of carbon dioxide compared with a similarly sized diesel unit. These are projected figures associated with the deployment, not verified quantities of fuel consumed or emissions already saved. The length of the initial phase, measured load profile and underlying emissions calculation have not been disclosed, making direct comparison with other sites difficult.

The LC100dc delivers a rated 100kW of direct current power. H-Power developed it from its existing LC30 generator, which has a rated output of 30kW, using the same chassis and broader platform architecture. According to the company, the larger unit offers more than three times the power at less than half the cost per kilowatt of the LC30. That is a company comparison of product economics, not a published independently audited total cost of ownership for the two generator types.

Hydrogen fuel cells use an electrochemical reaction between hydrogen and oxygen to produce electrical power, with water and heat generated during operation. Unlike a diesel engine, the fuel cell does not release carbon dioxide from fuel combustion at the point of electricity generation. Emissions over the full fuel chain still depend on hydrogen production, compression, delivery and other supporting processes. H-Power calls the planned project supply green hydrogen, but has not published a project-specific lifecycle assessment.

The LC100dc has a 100kW direct current output, which determines how its electricity can be used on site. Batteries and many charging systems operate with internal DC stages, whereas conventional welfare units and temporary building circuits generally require alternating current. The company has not identified the inverters, storage units or distribution equipment attached to the generator on this project. It would therefore be inaccurate to assume that every connected load can draw 100kW of AC power directly from the fuel cell unit.

Commercial deployment follows work through Speedy Hydrogen Solutions, a joint venture between H-Power and Speedy Hire. H-Power says utilisation of the existing LC30 fleet has exceeded its target, prompting a replenishment order for 15 units. It also reports that customers have achieved weekly rental and fuel cost parity with diesel for the smaller generator. These figures relate to the LC30 business; equivalent utilisation and running-cost results have not yet been reported for the 100kW unit.

The larger fuel cell rating changes the demands placed on hydrogen supply, heat rejection and electrical distribution, even where the equipment shares a chassis and architecture with a smaller model. Charging construction plant may create intermittent high demand, while welfare facilities typically impose a different and potentially steadier load profile. H-Power has not disclosed the actual duty cycle, efficiency, refuelling interval or measured availability of the LC100dc on the current contract, limiting any comparison with diesel equipment under equivalent site conditions.

H-Power’s separate HY5 ammonia cracker is being developed to make hydrogen close to the point of use. An ammonia cracker releases hydrogen from an ammonia carrier so that it can be treated to the purity required for fuel cell operation. The company envisages combining that technology with its generating equipment in suitable projects, but has not said that the LC100dc now operating on a UK construction site is supplied by an HY5 system. The fuel supply arrangement for the current contract remains undisclosed.

Construction sites may require temporary electricity before a permanent grid supply is available, or at locations far from a suitable distribution connection. The choice between a fuel cell generator and diesel equipment depends on the site’s power demand, delivery of fuel, maintenance, rental charges and electrical distribution setup. An installed generator rating alone cannot establish the economic or environmental performance of the complete temporary power arrangement.

H-Power chief executive John Wilson has described the 100kW unit as a response to customers seeking higher levels of off-grid electricity. The company intends to use the common chassis and system architecture to broaden its product range without increasing development expenditure at the same rate as output. That approach may support scale in manufacturing and service, while actual unit economics will depend on production volumes and the operating results achieved across customers.

The new contract places the LC100dc in commercial operation at its higher output rating. H-Power expects the first phase to involve up to 10,000kg of hydrogen and more than 350 tonnes of avoided carbon dioxide against a diesel comparator, but neither figure is a measured outcome to date. Further evidence on energy delivered, uptime, actual fuel use and the associated costs would show whether the larger generator can replicate the utilisation and economic results reported for the LC30 fleet.


Stories for you


  • Siemens Energy tests hydrogen-fired industrial CHP

    Siemens Energy tests hydrogen-fired industrial CHP

    Siemens Energy demonstrates cogeneration using hydrogen at a French mill. The HyCoFlex trial combined full-load electricity and process steam production with start-up and shutdown on pure hydrogen, while commercial deployment remains unconfirmed.


  • Tesla plans €3bn German Cybercab manufacturing expansion

    Tesla plans €3bn German Cybercab manufacturing expansion

    Tesla proposes major investment in its German vehicle manufacturing complex. Its planned Grünheide building targets eventual annual capacity of one million Cybercabs, with construction envisaged in 2027 and production from 2029, subject to approval.