Defra develops fertiliser supply resilience plan

Defra develops fertiliser supply resilience plan

Defra is developing plans to strengthen England’s fertiliser supply resilience. The government is examining nutrient efficiency, recycled materials and alternative fertiliser production technologies following renewed disruption to international markets and sharp increases in some UK fertiliser prices.


The Department for Environment, Food and Rural Affairs (Defra) has begun developing a Fertiliser Sustainability and Resilience Plan for England, examining how nutrient recovery technologies, more efficient fertiliser use and changes to farming practices could reduce exposure to international supply disruption.

The government published its initial paper on 19 November and is seeking contributions from manufacturers, researchers, technology developers, farmers and other industry participants. The engagement process will run from December 2026 to the end of March 2027, with the completed plan expected in spring 2027.

The initiative follows renewed disruption to global fertiliser markets, which contributed to increases of more than 30% in the UK prices of some fertiliser products over a two-month period earlier in 2026.

Britain depends on international trade for finished fertilisers and for chemicals used in domestic production. Disruption to either supply route can affect agricultural input prices, while changes in natural gas costs have a particular influence on the economics of conventional nitrogen fertiliser manufacturing.

Ammonia, a central intermediate in many nitrogen fertilisers, is conventionally produced using hydrogen derived from natural gas and nitrogen obtained from air. The process requires substantial energy input, connecting fertiliser production costs with fuel availability and industrial energy prices.

International price and supply shocks can therefore reach British agriculture through imported finished products, overseas feedstocks and domestic manufacturing costs. Defra’s proposed plan will examine how the available nutrient supply can be managed more efficiently alongside the development of alternative products and production methods.

The initial work covers three areas: improving nutrient management and nutrient use efficiency, increasing the use of organic and recycled nutrients, and reducing reliance on purchased nutrient inputs through suitable land management practices.

Improving nutrient use efficiency involves matching the nutrients supplied to crops with their requirements and the nutrients already available in the soil. Application quantity, timing, method and storage conditions can affect how much of an input becomes available for plant growth.

Nutrients applied in excess of requirements may be lost through processes including runoff, leaching or gaseous emissions, depending on the chemical form, soil conditions and method of application. These losses increase the quantity of input required to achieve a given agricultural outcome while creating environmental pressures.

Defra wants to investigate how better planning, access to reliable information and improvements in data and technology could increase nutrient use efficiency from the current national baseline.

Storage and application equipment can influence this work. The ability to measure the nutrient content of an input, distribute it accurately and apply it under suitable conditions determines how effectively a planned application can be carried out in practice.

Different fertiliser materials also have different operating characteristics. Granular mineral products can be handled through established spreading equipment, while liquid and organic materials may require alternative storage, pumping and application arrangements.

The second area of the plan concerns nutrients contained in organic materials, including products and residues that may otherwise be treated as waste. Recovering these nutrients could provide additional fertiliser inputs while changing the way material moves between industrial, waste treatment and agricultural operations.

Defra has specifically identified digestate pelletisation and ammonia stripping as technologies for further investigation. The department intends to assess their commercial viability, suitability and environmental performance at different scales.

Digestate is the material remaining after anaerobic digestion. Its composition depends on the feedstocks and treatment process, but it can contain nutrients suitable for agricultural use if the resulting material meets the relevant requirements.

Pelletisation can convert appropriately prepared digestate into a denser, more manageable solid product. Preparation may involve separating or reducing moisture content before material can be formed into pellets with suitable handling and storage characteristics.

The additional processing can make a nutrient product easier to transport or apply, but its economics depend on the energy required, material characteristics, processing throughput and the value of the finished product.

Ammonia stripping provides a different recovery route. The process can separate ammonia from suitable liquid streams under controlled conditions, allowing the recovered nitrogen to be captured for further processing or use.

Its performance depends on the characteristics of the liquid being treated and the operating conditions required to transfer and recover the ammonia. Equipment selection, energy demand, chemical use and the management of the remaining material all affect whether the process is commercially suitable.

Neither technology automatically provides a direct substitute for every conventional mineral fertiliser. The concentration and availability of recovered nutrients, product consistency, storage characteristics and crop requirements determine how a material can be used.

Defra’s assessment will need to consider these practical requirements alongside the availability of suitable feedstocks. A large processing facility may require material collected from several sources, while a smaller installation may need to operate economically with the quantity generated at an individual site.

Transport distances and infrastructure can influence both approaches. Moving material with a high water content may be costly relative to its nutrient value, creating an incentive to investigate processing methods that concentrate useful constituents before distribution.

Local partnerships could support collection, treatment and use of recovered nutrients, although such arrangements would need to establish consistent material quality, reliable demand and responsibilities for operating the processing equipment.

The third area concerns farming practices that can reduce demand for external nutrient inputs. Defra identifies companion cropping and lower-nitrogen crop varieties among the approaches to be examined, alongside more regenerative and lower-input land management methods.

These measures seek to improve how agricultural systems obtain and use nutrients, but their suitability depends on crop requirements, soil characteristics and the operating conditions of individual farms. They are not presented as a general replacement for fertiliser in all production systems.

Regulatory arrangements will also influence the development of new products. Defra has previously consulted on reform of the UK’s fertiliser product framework, which it describes as fragmented and largely unchanged for more than two decades.

The department considers that existing arrangements can constrain products such as organo-mineral fertilisers and plant biostimulants. Proposed reforms are intended to provide a clearer route for suitable innovations while maintaining appropriate environmental and product requirements.

Manufacturers considering recovered nutrient production need to understand how a material will be classified, what evidence is required to place it on the market and which standards apply to its intended use. These requirements can influence process design, quality assurance and investment in production equipment.

Initial engagement has identified several areas requiring further evidence, including access to trusted nutrient management advice, a consistent evidence baseline, investment in resilient crop varieties and the infrastructure needed to develop markets for recovered nutrients.

Defra plans to use discussions with industry, expert working groups and targeted workshops to examine possible interventions. The department will assess technical, regulatory and economic barriers before determining which measures should form part of the eventual plan.

No dedicated manufacturing subsidy, new fertiliser plant or mandatory adoption target has been established by the November paper. The proposals remain at the evidence gathering stage, with policy options to be developed through the consultation process.

The resulting plan is scheduled for publication in spring 2027. Its industrial significance will depend on whether the evidence supports commercially viable nutrient recovery technologies, suitable product regulation and the infrastructure needed to turn recovered materials into dependable fertiliser supplies.


Stories for you


  • KR Saws expands automated blade grinding capacity

    KR Saws expands automated blade grinding capacity

    KR Saws has expanded automated grinding at its Coventry facility. Its fourth Loroch machine combines saw blade sharpening, profiling and chip breaker grinding within one setup, supporting unattended production and faster job programming.


  • Embraer joins National Composites Centre research network

    Embraer joins National Composites Centre research network

    Embraer has formally joined Britain’s National Composites Centre research network. Its Tier 1 membership will support joint work on automated composite manufacturing, digital engineering and the development of advanced aerospace production processes.