EGGER Group has completed an expansion and modernisation programme at its Markt Bibart factory in Germany, following investment of more than €200m in manufacturing equipment, recycled wood processing, automation and logistics.
The programme has created approximately 70 jobs since EGGER acquired the site in November 2023, bringing employment at the factory to around 270 people.
Completion was confirmed on 17 November 2026, with the company identifying new recycled wood preparation facilities, lamination lines and a high-bay warehouse among the principal additions.
The investment has increased the range of manufacturing and processing activities undertaken at Markt Bibart, which produces particleboard and related decorative wood-based panel products.
Particleboard is manufactured by combining prepared wood particles with a binder and consolidating the material under controlled conditions.
The manufacturing process generally includes preparation and drying of the wood, application of the binding system, formation of the board structure and pressing under heat and pressure.
The dimensions and properties of the finished board depend on several interacting variables, including particle characteristics, moisture content, binder distribution and pressing conditions.
Changes in those conditions can affect the strength, density, surface quality and dimensional stability achieved.
The use of recycled wood introduces further requirements because recovered material does not necessarily arrive in the same condition as newly prepared industrial feedstock.
Waste wood can contain a mixture of particle sizes and unwanted materials, including metals or other contaminants introduced during its previous use and collection.
Processing equipment must separate unsuitable material and prepare the remaining wood for manufacturing.
Moisture content is another relevant variable. Wood with inconsistent moisture levels may behave differently during drying, blending and pressing.
Preparation therefore influences both the consistency of the material entering production and the operating conditions required by downstream equipment.
EGGER’s new recycled wood processing facility is intended to increase the ability of Markt Bibart to incorporate recovered material into its particleboard manufacturing operations.
That capability supports the use of wood that has already served a previous purpose, provided that it can be recovered and processed to the required specification.
The company has not disclosed a new annual recycling throughput for the facility or a fixed percentage of recycled content applying to every panel grade manufactured at the site.
Actual use will depend on the available recovered wood, the product being manufactured and the processing requirements associated with its intended performance.
The recycling investment also changes the relationship between raw material preparation and finished board production.
A factory may have sufficient pressing capacity but be unable to maintain output if suitable feedstock is not available at the required rate.
Increasing the range of material that can be processed can improve sourcing options, although the preparation system itself must operate reliably and provide consistent material to the manufacturing lines.
The additional lamination equipment supports a different stage of the production process.
Raw particleboard can be used as a substrate for decorative surfaces, allowing the manufacturer to supply products ready for further conversion into furniture components and interior fittings.
Lamination involves applying surface materials under appropriate conditions so that the finished panel achieves the required appearance and functional characteristics.
The resulting quality depends on the board surface, the laminate or decorative material, and the process used to join them.
Temperature, pressure and material handling can influence the outcome, while surface defects or dimensional variation in the underlying panel may affect the finished product.
Adding lamination capacity allows more processing to be undertaken within the factory, reducing reliance on separate facilities for certain finishing operations.
That change places additional importance on coordinating raw board production with the requirements of the downstream lines.
A lamination process may need boards of a particular thickness, surface condition and size, with suitable material available when the equipment is scheduled to operate.
The expansion also includes a high-bay warehouse intended to strengthen internal logistics and storage.
Wood-based panels occupy substantial space and must be handled in ways that protect their edges and surfaces while accommodating their dimensions and weight.
High-bay storage systems make greater use of vertical space, with handling equipment moving materials to and from designated locations.
Automated movement can support inventory management and material availability, provided that the system is configured for the loads being handled.
The effectiveness of the warehouse depends on its connection to production and dispatch operations.
A storage system may accommodate a larger number of panels without increasing the maximum throughput of the manufacturing equipment supplying it.
However, it can help manage differences between production schedules and customer orders, particularly where several panel types or surface finishes must be held before dispatch.
The factory’s operational performance will depend on how the new recycled material preparation, manufacturing, lamination and storage systems work together.
A restriction affecting one process can influence the flow of material through subsequent stages, even where individual machines have unused capacity.
The investment programme consequently addresses the manufacturing chain rather than simply adding a single high-output production line.
EGGER acquired Markt Bibart from Rauch in November 2023 and has since developed the facility in phases.
The company identified the site as an important part of its European wood-based materials network, with the expansion intended to strengthen its ability to serve regional customers.
The increase in employment provides a measurable indication of the additional activities established during the investment period.
Approximately 70 new roles have been created, while the workforce has grown to around 270 employees. These figures relate to the completed programme rather than a future recruitment target.
EGGER has not published a new annual particleboard output figure directly attributable to the investment or quantified the resulting increase in manufacturing productivity.
The company’s broader operations include panel manufacturing, decorative products and wood recycling activities across several markets.
Its German investment adds production and finishing capabilities within that network, although not every product supplied by EGGER will necessarily be manufactured at Markt Bibart.
The project has moved beyond construction and equipment installation into an operational phase.
Subsequent production results will establish how the expanded facilities affect recycled material use, output, product mix and the flow of finished panels through the site.
The completed programme provides Markt Bibart with more than €200m of upgraded manufacturing and logistics infrastructure, together with a larger workforce supporting its expanded operations.




