UNISON BRINGS DRAMATICALLY REDUCED LEAD TIMES TO SAFRAN LANDING SYSTEMS
Gloucester-based Safran Landing Systems OE (Original Equipment), part of the global Safran group, has taken delivery of two new all-electric ‘Breeze’ CNC tube bending machines from leading tube bending machinery specialists, UK-based Unison Ltd.
The Unison Breeze machines (16 mm and 30 mm maximum tube diameter models) will be used to precision bend thin-wall section titanium tube for the manufacture of 3/8-inch (9.53 mm) to 3/4-inch (19 mm) diameter hydraulic brake and actuator pipes for commercial aircraft undercarriage systems, including those used on Airbus A320, A330 and A340 models. They replace two hydraulically operated tube bending machines that have been in use at Safran for a number of years.
“Realising it was time to renew our tube bending capabilities, as part of our ongoing risk analysis activities – and necessitated by significantly increased manufacturing requirements – we approached a number of tube bending machinery manufacturers to discuss the various options available to us,” comments Safran Assembly Flow Line Manager, Jonathan Crewe.
“Absolute non-negotiables were uncompromising repeatability and reliability, as well as the ability to produce right-first-time parts. Additionally, as a key manufacturer of aerospace components and operating within a ‘just in time’ supply chain, it was essential for us to know that should it ever be needed, on-site machine tool support would never be more than a few hours’ drive away.”
Existing customer visit
To enable the Safran team to experience first-hand the capabilities of its all-electric range of Breeze tube bending machines, Unison Ltd arranged for them to visit an existing customer’s facility at Farnborough and observe titanium tube being bent. On the strength of the visit and the testimony provided by that customer, trial parts were produced at Unison’s UK-based manufacturing centre, the order was subsequently placed, and master pipe samples were supplied to Unison Ltd in readiness for machine setup and sign off.
Excellent support
“We benefited from excellent support and advice at every stage of the process,” adds Jonathan Crewe. “We were particularly impressed by the effort Unison put into training, ensuring that our operators were fully familiar with the Unibend operating system and could confidently bend thin-wall titanium components, all with precisely controlled levels of spring-back to compensate for the material’s high yield strength. Unison were also exceptionally flexible in working around our incredibly demanding production schedules. We have produced right-first-time components since day one with our new Unison Breeze machines, which our operators rate highly. Unison also fully understood our need for prompt support in the unlikely event of a breakdown – an essential requirement of our risk analysis strategy and a clear benefit of us buying from a UK-based company.
“On a personal note, I am really impressed with the performance of our two new machines,” he continues, “and, in particular, the opportunities the technology opens up for us to streamline our workflow from Design Engineering through to Production, with electronic translation of a CAD model into a bending program. This both dramatically reduces the lead time of new product development from around eight months to just three days and improves the accuracy of the finished pipe to the initial design intent. I am also grateful to the team at Unison for their timely and professional assistance through the industrialisation phase of the project.”
Intelligent tube manipulation
Unison Breeze machines offer rapid setup, fast tooling changes, exceptional power, rigid mechanical design, and all-electric control for right-first-time repeatability. The Unison Breeze all-electric 16 mm and 30 mm tube bending machines purchased by Safran are well suited to manipulating exotic alloys such as titanium and Inconel, as used in the aviation industry and provide high-quality thin-wall bending. Multi-stack tooling allows the most complex of parts to be formed in one uninterrupted manufacturing cycle, while Unison’s bar code scanning system ensures that only the correct tooling is used. Unison’s standard-fit rise and fall pressure die can result in significant savings in tooling costs and allows tools of very different radii to be used on a part within a cycle. Each tube bender can be programmed manually or from CAD data using industry-standard IGES or STEP files.
“At Unison, we are often invited to advise customers across the aerospace industry on particularly challenging tube bending projects,” concludes Steve Haddrell. “That’s partly because of the immense capabilities offered by our all-electric Breeze tube bending machines. It was an honour to be chosen to supply Safran with two machines – and to be recognised for the exceptional levels of service that are associated with the Unison name.”
Unison Ltd: intelligent tube technology
Established in 1973, Unison Ltd is the UK’s leading manufacturer of tube and pipe bending machines, offering the largest range of all-electric benders for diameters from 4 mm (5/32”) to 275 mm (10” schedule pipe). With a reputation for building highly powerful, highly robust machines that deliver uncompromising levels of accuracy and repeatability, Unison Ltd continually innovates the tube and pipe bending marketplace. The company manufactured the world’s first all-electric tube bender in 1994, followed by the world’s first all-electric multi-stack tube bender, then the world’s largest all-electric tube bender for the shipbuilding industry. Available in single-stack, multi-stack and right/left varieties, Unison machines are delivered to more than 20 countries globally. Unison’s tube bending software is recognised as the most user-friendly control system for tube bending machines. The software is written and supported by Unison, ensuring complete control of its evolution, with no need for third party support.
