ABB supplies maritime megawatt charging system for Auckland Transport’s new electric ferries

ABB has secured a contract with Auckland Transport (AT) to deliver what it states is the maritime industry’s first megawatt charging system (MCS) to recharge electric ferries using the same interface as trucks and airplanes.

The standardized and highly adaptable system lowers the barrier to entry and is expected to improve electric vessel competitiveness against fossil-fueled counterparts.

As part of its Mission Electric initiative, AT has ordered two 200-seat all-electric ferries and two 300-passenger hybrid-electric ferries and is expected to become the largest electric ferry fleet operator in the Southern Hemisphere by 2030. Replacing conventional, diesel-operated ferries, the new ferries are estimated to help AT cut diesel use by 1,500,000 liters and CO₂e emissions by 4,000 metric tons per year, equivalent to the annual emissions generated by about 90 diesel buses.

“It is incredibly exciting to lead the way with modern, low-emission public transport,” said Nathan Cammock, program director of Auckland Transport. “Our new Auckland-owned ferries will bring greater passenger capacity, improved accessibility and a more consistent customer experience. They will rely on modern charging infrastructure to deliver on these capabilities.”

While ferries carry only 6% of public transportation users in Auckland, their diesel engines produce 20% of the city’s public transportation greenhouse gas emissions (according to a 2023 report). New Zealand has set decarbonization goals by including a 2050 net-zero emissions target in its Zero Carbon Act. Given its responsibility for public transportation infrastructure around the Hauraki Gulf, AT has chosen to electrify its ferry network using the CharIN megawatt charging system standard.

ABB will work with local partners to deliver, engineer and install five complete charging solutions during 2024 and 2025 at several ferry terminals. Each system will feature a pair of 1.65MW chargers, consisting of a transformer, ACS880 converters, MCS plugs and cable management on the ferry pontoons.

The chargers will deliver over three megawatts of direct current (DC) power to sustain the short turnarounds and high-power demands needed to maintain an efficiently operated ferry fleet. The connectors will be handled by crew during passenger turnarounds.

The Auckland installation will also be the first MCS supplied by ABB to use the standardized plug-in interface, although the group has been delivering shore-to-ship power for over 20 years since an initial contract with Princess Cruises in Alaska. The Auckland solution will be similar in charging capacity to ABB’s landmark project to support 10 all-electric ferries for public transportation provider Transtejo Soflusa in Lisbon, Portugal.

“ABB’s proven experience in delivering robust and high-performance ship charging solutions and their willingness to embrace the megawatt charging system were major considerations in AT’s choice,” commented Murray Burt, chief engineer of Auckland Transport. “It was important to combine ABB’s global support capabilities and long-standing local presence for a project that will transform Auckland’s ferry services.”

“Ferries connect communities and have a significant impact on the environment,” said Palemia Field, ferry segment manager at ABB Marine & Ports. “There’s a well-known Māori proverb which says ‘ka pū te ruha, ka hao te rangatahi’, or ‘once the old fishing net is worn, it is put aside to make way for the new fishing net’. Electrification is crucial and we must move away from emissions-generating technologies. Noise- and emission-free operations benefit both the broader and local communities, while passengers on board enjoy improved travel comfort thanks to less vibration.

“As the electrification of the global ferry fleet increases, ABB expects more operators to opt for a standardized interface that is familiar from other industries. “We are ready to deliver the MCS solution to meet the demand, wherever standardized connections make it easier for operators to design their ferries and terminals.”

Read more of the latest ferries and cruises updates from the electric and hybrid marine technology industry here.